Making primers

We often hear that oligos (primers) are a simple product, and they should work every single time. From a producer’s point of view, oligos are arguably the most complicated products among common molecular biology reagents, at least in terms of the number of chemical steps required. DNA synthesis starts from the 3’ end to the 5’ end (opposite to DNA polymerases) on a solid support (e.g. CPG beads). For the addition of each base, the process begins by removing a protection group via “Deblocking”; then activating the last base for coupling with an “Activator”, adding the current nucleotide in the chemical form of a phosphoramidite (4 times in our protocol), blocking un-reacted openings with “Capping A and B solutions” (again 4 times each), forming bonds between bases by oxidization with Iodine, then looping all the way back to the beginning of the cycle. Many of these chemicals are either highly sensitive to moisture or have a short shelf life (can go bad any time).

Coming back from a seminar, sitting at the lab desk, you know you have a new idea and some cloning to do, and of course, it must be done tomorrow. The first thing you do is to send in some oligo sequences online to a local synthesis company late in the afternoon after looking at some maps and sequences. Around noon the next day, the oligos will be delivered in person to your hands. Most times everything will just work out fine as far as experiments involving primers are concerned; others you get stuck here and there along the way of cloning. Chances are you have run into problems with primers not giving PCR signals or clones with mistakes in the primer regions at some points in your research career. Even if this has only happened a few times, the memory, as well as the dissatisfaction and anger, can last for quite some time.

Between ordering and delivering, oligos are made overnight; they are then post-synthesis processed (requiring several hours starting in the early morning), OD’ed, and concentration adjusted. Given that the machine completes the run without any problems (power or computer related), and none of the chemicals run out, the best quick indicator of a good run is a color change from the protection group removed by Deblock at the last base. If there is visible amount of blocking group at the end of the synthesis, as reflected by an orange color from a Trityl group, it is likely that the synthesis was efficient till the end. Unfortunately, the efficiency of adding each base is never 100%–accumulations of missing or, at a lower percentage, mistaken bases will add up, especially in long oligos. Purification will remove some of the oligos with deletions, but not all of the bad oligos. MASS analysis will help determine the approximate percentage of bad oligos, but it will require time and cost not typically chosen by customers. It is our hope that understanding how oligos are made will help with more effective use of oligos when you order oligos, conduct experiments using oligos, or clone with oligos.

New Product of the Week: Phosphate-3′-CPG for oligo synthesis, email for details.

Promotion of the week: Promotion of the week: 10% off on 4-in-1 lentiviral particles for iPSCs generation. Email with promocode: VIRUS, or using online purchase.

Tags: , , , , , , , , , , , , , ,

Thursday, April 21st, 2011 oligos and cloning No Comments

Triple Labeled Oligos-Put Your Fluorescence in Perspective!

Allele is now distributing to its customers the newest technology in RT-PCR published less than two weeks ago. It is a RT PCR probe that utilizes fluorescence resonance energy transfer (FRET) and TaqMan methods in order to provide an internal positive control (IPC) for real-time PCR assays. This new RT-PCR method consists of forward and reverse primers, a regular TaqMan probe, and the new triple-labeled FRET-TaqMan Probe Probe affixed to a plasmid, which negates the uncertainty in the presence and effects of amplification inhibitors that could generate a false negative in your experiments. Two emission sources are all that are required for the FAM and Cy5.5 fluorescence signals at 530 nm and 705 nm respectively. You do not need color compensation software, multiple excitation sources, or even a high tech laser to initiate excitation with this system.

If your RT PCR instrument only has one light source to excite the fluorophore then the FRET-TaqMan method is the only way to exploit the IPC technology. Fortunately Allele Biotech is selling these triple-labeled probes at a great price! Put your fluorescence in perspective and know your true RT-PCR results with these Specialty Oligos from Allele Biotech!

Tags: , , , , , , , , , , , ,

Wednesday, July 1st, 2009 oligos and cloning No Comments

Something you should know about oligos

Oligos are made from 3’ end to 5’ end by nucleotide-wise coupling. Each coupling cycle involves about half a dozen moisture-sensitive chemicals and takes about 15 minutes to complete when 96 oligos are being synthesized at the same time on one machine. Like most chemical reactions, couplings do not reach 100% efficiency; in consequence, about 1% of the oligos would have an unsuccessful coupling at any given position and therefore missing that base. There are “capping” steps designed to prevent oligos having an unsuccessful coupling from continuing to elongate; but in practice, capping can only reduce incomplete oligos in the final pool, not eliminate them.

In PCR reactions, primers with mistakes typically have less chance of pairing with template than those with perfect match. Increasing annealing temperature may prevent primers with deletions from participating in PCR reactions. However, oligos that miss 5’ end restriction site but have no internal deletions will not be selected against by higher annealing temperature since initial annealing is not affected. Purification of oligos by PAGE can effectively remove oligos with deletions in any position, albeit not eliminate them. For cloning purposes, purifying oligos typically makes the post-ligation steps (i.e. inoculation, minipreps, and sequencing) much easier.

At Allele Biotech Oligo Services, we use top quality chemicals from Glen Research and extensive coupling and washing steps in order to synthesize oligos with as few mistakes as chemically possible. Most oligo mistakes occur in individual molecules, which you may encounter by chance. Sequencing a few more colonies for a cloning project is the easiest and fastest way to achieve desired results if a mistake is found in the first round of sequencing. If the customer prefers remaking oligo, we honor our 100% guarantee policy with replacement of all our oligos shorter than 45 bases and the longer ones with purification. We always appreciate our customers’ feedback.

General suggestions for using oligo primers for cloning

* Use more stringent PCR annealing conditions if possible.

* Purify oligos, especially long primers.

* Even though higher cost on oligos, much lower costs and less time on minipreps and sequencing.

* Since mutations happen randomly, sequence a few more colonies could result in identifying desired plasmid

Sometimes it is very difficult to clone PCR products by restriction digestion and ligation. Restriction enzymes do not cut well near the end of linear DNA even with extra bases added 5’ to the restrictions sites. It is almost always helpful to clone the PCR fragment into a PCR cloning first. Cut with designed restriction enzymes and send only those showing insert of correct sizes for sequencing.

Oligo mutations augmented by E. coli during colony selection. The following was a real case using Allele oligos to create genes encoding fusion antibody chains. The strategy was to fuse a humanized antibody heavy chain to a light chain by a pair of oligos that would overlap cDNAs for both chains. The vector was pBluescript II, where insert could disrupt an expressed beta-galatosidase, thus changing the color from blue to white in the presence of IPTG and X-gal. After minipreping and sequencing dozens of colonies, all plasmids had frame-changing mutations in the junction region, which were seemingly introduced by the primers. Worrying about the oligo quality, we checked oligo synthesis records, including reagent log of that run, Trityl color indication record (indicator of coupling efficiency of up until the last base), gel pictures of oligos made in the same batch, feedback record from other customers using oligos from that day. We could not find anything unusual from the records. We decided to remake the oligos. After two weeks of work to regenerate plasmids for sequencing, the same results were obtained—all plasmids had mutations in the same region. There seemed to be nothing else we could do but to remake the oligos with somewhat different designs, e.g. shifting the overlapping regions slightly, or shortening the oligos a little bit, and performed PAGE purification this time. The results were the same once again.Then it occurred to us that maybe the expression of the protein from the pBluescript vector caused toxicity to E. coli and therefore forced the bacterial cells to either select those clones with frame-shifting mutations or create mutations by themselves during growth. Without the option of changing the vector choice, we simply used a different competent cell strain that does not support expression from the promoter on pBluescript. We did it with oligos from different preps, purified and unpurified, in an attempt to obtain as much information as possible about oligo use for our customers and our own future research.The result, all plasmids sequenced were completely correct.

Other Cloning Example Cases:

Case 1:

Aim: To synthesize a 1,650 bp gene from oligos.
Design 36 overlapping oligos of 60 to 80 bases long.
Difficult to do PCR in one piece with all oligos. Switched to 3 separate PCR for about 550 bp each.
Sequenced plasmids from colonies with each of the 3 parts cloned into PCR cloning vector: Part I: 2 plasmids sequenced, both with mutations; 1 more sequenced, correct. Part II: 1 plasmid sequenced, wrong; 1 more sequenced, correct. Part III: 1 plasmid sequenced, with mutation; another sequenced, wrong; 3 more sequenced, 2 correct.
Mistakes coming from oligos are random, there is no prediction exactly how many colonies should be sequenced, but normally sequencing 3 in a group is a good practice.

Case 2:

Aim: To synthesize a 300 bp gene from oligos.
Design 16 overlapping oligos of 60 to 80 bases long.
PCR in one piece with all oligos.
Sequenced plasmids from colonies cloned into PCR cloning vector: 2 plasmids sequenced, both with deletions; 3 more sequenced, 1 with deletion, 2 with base change; 2 more sequenced, both completely correct.
When luck is not on your side, sometimes a short DNA still requires a good number of colonies to be sequenced.

Case 3:

Aim: To synthesize a hypothetical gene of 1,800bp from oligo overlapping assembly.
34 oligos of about 55 bases each direction.
Difficult to do PCR in one piece with all oligos. Switched to 3 separate PCR for about 550 bp each.
Sequenced 2 colonies, 1 was perfect from one end for about 900 bases, but a number of mutations found when sequenced from the other end. The 2nd plasmid was 100% correct from the first to the last base over the entire 1.8kb region!.
When luck is on your side, you may hit the jack pot blind-folded.

Case 4:

Aim: PCR-clone 3 human cDNAs into a baculovirus expression vector.
PCR with primers that would introduce restriction sites Not I and Xho I.
PCR with standard procedure with high fidelity polymerase, PCR products were then run on gel and the desired bands purified by Allele DNA purification kits.
Two of the 3 constructs were all correct in all plasmids sequenced. Plasmids for the other construct all showed PCR products missing half of the Not I site. Sequencing additional plasmids gave the same results. We then gel purified the primer, repeat the process, and all plasmids sequenced were correct.

Have any insights or comments of your own about using oligos? Let’s share them. Thread away.

Tags: , , , , , , , , ,

Thursday, December 4th, 2008 oligos and cloning Comments Off on Something you should know about oligos